• 123 HP Envy 4510 Printer Support & Troubleshooting

    123.hp.com/setup

123.hp.com/setup 4510 Printer First Time Setup

  • Unbox your HP envy 4510 printer.
  • Lift the scanner unit and remove the packing materials.
  • Open the cartridge access door and remove the packing materials.
  • Close the scanner.
  • Remove the packing materials from the input tray and the output tray.
  • Check whether any tapes or packing materials are left in the printer.
  • Then, connect the power cord to the hp envy 4510 printer.
  • Power on the printer using the power button in the printer.
  • Lift the scanner unit and open the cartridge access door.
  • Install the cartridges in the cartridge holder and close the cartridge access door.
  • You can download latest Driver & Manuals from 123.hp.com/setup 4510 or 123.hp.com/envy4510.

123.hp.com/setup 4510

Step - 1

SHARE YOUR PROBLEM

Step - 2

DIAGNOSE YOUR PRINTER

Step - 3

PROBLEM FIXED

123.hp.com/setup 4510 Wireless Protected Setup

  • The basic need to create WPS setup in your computer is that your Wireless, Printer and router must be WPS supported. This hp envy 4510 is WPS supported and so no worries.
  • This can be known by checking whether your network has a WPA or WPA2 security. If you have this, then go with the further steps.
  • Turn on your 123 hp envy 4510 printer.
  • Press the wireless icon on printer control panel.
  • Touch the settings and then the Wireless Setup Wizard.
  • Follow the on-screen instructions and complete connection. If needed, download the HP wireless software.
  • Enter the SSID of your home network and password and connect your Printer to the wireless network
  • In your Windows, go to view network connections.
  • Right click on your network name to view the status bar.
  • In the Wireless Properties window, select Security Tab.
  • Click on show characters to view your wireless network password.

123 HP Envy 4510 Copy Setup

The copy option in the hp envy 4510 printer allows you to copy the documents easily. You can copy the documents by feeding the originals in the scanner glass. To setup copy in your hp envy 4510 printer, follow the steps below:

  • Unbox your hp envy 4510 printer.
  • Remove all the packing materials from the printer parts.
  • Connect the power cord to the printer and the electrical outlet.
  • Switch on the printer.
  • Install the ink cartridges in the cartridge holder properly.
  • The hp envy 4510 printer will take sometime to install the cartridges.
  • Now your printer is ready to copy.
  • Load the original print side down in the scanner glass.
  • In the home screen of your printer, touch the copy
  • You can download latest Driver & Manuals from 123.hp.com/setup 4510 or 123.hp.com/envy4510.

123 HP Envy 4510 Fax Setup

Faxing is a special feature available in the hp envy 4510 printer, which allows you to send and receive fax from your printer. To setup fax in your printer, follow the steps below:

  • Plug a phone line splitter into the phone jack.
  • Plug one end of the phone cord into the phone line splitter and the other end to the line port on the DSL Modem.
  • Plug the DSL filter to the port on the splitter.
  • Plug the other end of the phone cord to the port on the DSL filter and the other end of the cord to the one line port on the rear of the hp envy 4510 printer.
  • Connect the telephone to the printer using the telephone cable.
  • Power on the printer.
  • Load the document in the scanner glass( print side down) or in the document feeder( print side up).
  • You can download latest Driver & Manuals from 123.hp.com/setup 4510 or 123.hp.com/envy4510.

HP Envy 4510 Printer Scan Setup

In hp envy 4510 printer, you can scan to your computer or an email recipient and also by scanning you can make changes in the documents. To setup scan to your windows, follow the steps below:

  • Unbox your hp envy 4510 printer.
  • Remove all the packing materials from the printer.
  • Connect the power cord to the printer and to an electrical outlet.
  • Power on your hp envy 4510 printer.
  • Open the scanner in your hp envy 4510 printer.
  • Place the document or photo you want to print in the scanner glass placing the print side down.
  • Close the scanner lid.
  • Now, power on your computer and install all the hp envy 4510 printer softwares and drivers.
  • On your windows computer, click on windows.

123.hp.com/setup 4510 Unboxing Setup

Printer & Manual Download
HP Printer Support
Printer Troubleshoot
Printer Setup
HP Software Downloads
Driver Install

HP Envy 4510 Print using Windows

  • Unbox your hp envy 4510 printer.
  • Remove all the packing materials from the printer.
  • Connect the power cord to the printer and an electrical outlet and power on the printer.
  • Install the cartridges and allow the printer to install the cartridges.
  • In your PC, install all the necessary drivers and softwares available for the hp envy 4510
  • Go to necessary driver installation file in your computer’s hp.com.
  • Open the file and click continue to run the software.
  • In the software selection screen, customize your software selections and click next.
  • Click on the check box to agree to the terms and then click next to proceed.
  • In the selection screen, select USB cable option.
  • Connect your USB cable with your printer to the computer

123 HP Envy 4510 Print using Mac

  • Unbox your hp envy 4510 printer.
  • Remove all the packing materials from the printer.
  • Connect the power cord to the printer and an electrical outlet and power on the printer.
  • Install the cartridges and allow the printer to install the cartridges.
  • In your PC, install all the necessary drivers and softwares available for the 123.hp.com/setup 4510 or 123.hp.com/envy4510.
  • Go to necessary driver installation file in your computer’s hp.com.
  • Open the file and click continue to run the software.
  • In the software selection screen, customize your software selections and click next.
  • Click on the check box to agree to the terms and then click next to proceed.
  • In the selection screen, select USB cable option.
  • Connect your USB cable with your printer to the computer
  • The HP printer assistant opens automatically.
HP Envy 4510 Driver Install for Windows 10
  • Switch on the hp envy 4510 printer.
  • Connect the printer to the PC with the USB cable.
  • If the OS is Windows 10, then the built in software will automatically detect the OS.
  • The built in software will start downloading the driver software into your system.
  • Follow the instructions that appears in the screen to complete the installation process.
  • For further assistance 123.hp.com/setup 4510 or 123.hp.com/envy4510.
  • If it is some other Windows OS follow the steps below.
  • Power on the Printer.
  • Insert the CD/DVD ROM provided in the system.
  • Connect the USB Cable to the Printer.
  • You will get a prompt message to connect it to the System.
  • Connect the cable to the system and printer and place them close to each other.
  • If your system and printer are connected properly, the system detects the Printer.
  • If your system didn’t detect, then unplug the USB cable and reconnect it.
  • If again not detected, try a different USB slot.
  • At once the printer is detected by the system, the Auto run window will open.
  • You can download latest Driver & Manuals from 123.hp.com/setup 4510 or 123.hp.com/envy4510.