Step - 1

SHARE YOUR PROBLEM

Step - 2

DIAGNOSE YOUR PRINTER

Step - 3

PROBLEM FIXED

Envy 5660 driver install Windows 10

  • Switch on the hp envy 5660 printer.
  • Connect the printer to the PC with the USB cable.
  • If the OS is Windows 10, then the built in software will automatically detect the OS.
  • The built in software will start downloading the driver software into your system.
  • Follow the instructions that appears in the screen to complete the installation process.
  • For further assistance hp.com/setup.
  • If it is some other Windows OS follow the steps below.
  • Power on the Printer.
  • Insert the CD/DVD ROM provided in the system.
  • Connect the USB Cable to the Printer.
  • You will get a prompt message to connect it to the System.
  • Connect the cable to the system and printer and place them close to each other.
  • If your system and printer are connected properly, the system detects the Printer.
  • If your system didn’t detect, then unplug the USB cable and reconnect it.
  • If again not detected, try a different USB slot.
  • At once the printer is detected by the system, the Auto run window will open.
  • Double click on the Setup File.
  • Start the Installation wizard.
  • After installation, your system is ready to print any document with the help of the printer connected to it.
  • To check it, take a test print. For more information, click on hp.com/setup 5660

Envy 5660 driver install Windows 10

Printer & Manual Download
HP Printer Support
Printer Troubleshoot
Printer Setup
HP Software Downloads
Driver Install
© Copyright 2018-19 | 123-hp-com