• HP Officejet 4652 Setup

    123.hp.com/setup
Step - 1

SHARE YOUR PROBLEM

Step - 2

DIAGNOSE YOUR PRINTER

Step - 3

PROBLEM FIXED

123 HP Officejet 4652 Setup

  • Unbox your 123 hp officejet 4652 printer.
  • Remove the tapes from the outside of the printer.
  • Lift the scanner lid and remove the packing materials. Then, close the scanner lid.
  • Open the paper tray and remove the packing materials.
  • Open the cartridge accesss door and remove the packing materials.
  • Connect the power cord to the printer and to an electrical outlet.
  • Now, power on your printer using the power button in your 123 hp officejet 4652 printer.
  • Open the cartridge access door.
  • Unpack the tri-colour ink cartridge and remove the tape alone from the cartridge.
  • Insert the tri-colour cartridge in the left slot.
  • Unpack the black colour ink cartridge and remove the tape from it.
  • Now, insert the black cartridge in the right slot.
  • Do not shake the cartridges while opening, as it may damage the ink and cause leakage.
  • Then, close the cartridge access door and allow the 123 hp officejet 4652 printer to install ink.
  • Make sure that you have installed the ink cartridges properly. If not, then your printer will show error light in the printer’s control panel.
  • At once installation of ink is completed, you will get a message in the printer’s control panel as installation completed.
  • Now, your 123 hp officejet 4652 printer is ready to use. For setup, click on hp.com/oj4652setup.

CHANGE FROM A WIRELESS CONNECTION TO A USB OR ETHERNET CONNECTION

For Windows:

  1. Perform any one of the following based on the operating system you use.
    1. Windows 8: Start – – >All Apps – – > Printer name – – > Utilities.
    2. Windows 7, Windows Vista and Windows XP: Start – – > All Programs – – > HP – – > Printer folder.
  2. Select Printer Setup & Software.
  3. Tap on Connect a new printer.
  4. When asked, choose the appropriate connection.
  5. Follow the on screen prompts to complete the setup process.

For Macintosh (OS X):

  1. Connect your HP printer to your wireless network.
  2. Go to the Applications/Hewlett-Packard/Device Utilities section and then select HP Setup Assistant.
  3. Now, change the connection to wireless for your printer.
Printer & Manual Download
HP Printer Support
Printer Troubleshoot
Printer Setup
HP Software Downloads
Driver Install